Disc two-sided slicing (K)
Use
Cutting to thick and thin slices – all kinds of fruit and vegetable, use button
A1
.
Regulator setting 1 – max.
disc for chips one-sided (l)
Use button
A1
. Regulator setting min. - 1.
A
ssembling
Put the centre opening of selected grater on the propulsion shaft
A6
. Always put two-sided
graters with the side you want to use facing upwards. Remove the grater reversely.
R
ecommendation
- When processing big amounts of ingredients, check if they do not pile under the disc.
empty the container more frequently.
- Chop big pieces beforehand so that they fit the feeding opening.
- Always push the ingredients down the feeding opening with a pusher which should be
moved slowly and without big pressure downwards.
- In case the ingredients are to be grated coarse (e.g. breadcrumbs), use the falcate knife
for finer grinding.
- When grating or granulating soft ingredients use low speed in order that the ingredients
do not turn into mash.
- for ingredients which you usually grate (hard cheese, nuts, chocolate), use the falcate
knife f which is intended also for chopping (grinding).
- Times of preparation (processing) depend on amount, kind and quality of substances
used, normally they are in tens of seconds.
Bl
ender (D)
Assembling
Remove the cover
A10
from a turned-off propulsion unit
A
. Put the assembled blender
container on the propulsion shaft
A7
, let it slide down the shaft and turn it clockwise all the
way. Remove the container reversely. do not exert too much pressure on the handle when
attaching or removing the container. for operation of the blender it is necessary to place
the container
B
(without inserted accessories) on the propulsion unit correctly and secure
the lid
C
.
Us
e
The blender is intended for mixing juices, milk shakes, soups, sauces, baby and diet food,
airy dough, sponge cake dough, puree, use button
A1 / A2
. Regulator setting 2 – max. / —.
Re
commendation
- If you process big amounts of food, divide them in separate portions so that you keep
recommended times of operation and rest of the propulsion unit.
- It is better to cut solid ingredients in smaller pieces. do not process very hard ingredients
(e.g. ice-cubes etc.) The knife would become dull very shortly.
- Soak hard ingredients in water before processing (e.g. pulse, soy beans etc.).
- Never remove the cover
D3
when the unit is operating.
- liquid ingredients (e.g. oil, milk) or other ingredients may be added to the container after
taking out the plug
D4
through the small opening in the lid (when the engine is operating).
We recommend leaving the plug in so that liquid ingredients do not splash out through
the feeding opening.
64
GB
