- The longer you process the ingredients in the blender, the finer the result will be.
- You can also process hot liquids up to temperature of 80 °C, e.g. sauces, soups.
- Never fill the container with liquids which make foam (e.g. milk) up to “MAX” so that they
do not overflow. In this case we recommend amounts approx. 0.5 l.
- If you are not satisfied with the result, turn the appliance off, stir the ingredients using the
spatula, remove part of the ingredients or add some liquid.
- Times of preparation (processing) depend on amount, kind and quality of substances
used, normally they are in tens of seconds.
IV. STORING
Case (M)
for safe and economical storing of all accessory, prevents its blunting and mechanical
damage. There are protrusions on the back panel for hanging the case on the wall. Mind
that there is no
electric, telephone or water installation
under the plaster in a place of
the holder.
Supply cord (A9)
fold the supply cord into the storing space
A8
in the back of the appliance.
V. MAINTENANCE
Unplug the appliance from el. outlet before any handling with the appliance! Do not
use any rough and abrasive cleaning agents!
Clean the propulsion unit
A
with a damp
cloth and soap. Clean all accessories immediately after use in hot water with soap (you
can use a dish washer). You can disassemble the container for easy cleaning (pic. 5).
Be very careful when cleaning the knives and graters!
Pay attention that the cutting
edges of the accessories do not come in contact with hard objects which blunt them and
thus decrease their efficiency. Some foods may discolour the accessory. However, this has
no effect on the functions of the appliance and this discoloration will usually disappear with
time. Never dry the plastic die-cast over a heat source
(e.g. stove, el./gas cooker).
VI. ENVIRONMENT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specifi
ed on the product or in the accompanying documentation mean that the used electrical
or electronic products must not be disposed of together with municipal waste. for proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authority or at a collection site.
fines can be imposed for improper disposal of this type of waste in agreement with the
national regulations.
If the appliance is to be put out of operation, after disconnecting it from power supply we
recommend its cutoff and in this way it will not be possible to use the appliance again.
M
ore extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with
the instructions of the manufacturer will lead to expiration of the right to guarantee
repair!
65
GB
