Brother 09055CDN Service Manual Download

Page: 421 / 590

4-3

Confidential

1.1.2 Rewriting the firmware using computer

<Procedures>

(1) Turn the power switch of the machine off. Turn on the power as pressing the

button.

Check that "

" appears on the LCD.

(2) Connect the computer to the machine with the USB cable.

(3) Double-click the "FILEDG32.EXE" to start. The following screen appears. Select the

"Brother Maintenance USB Printer."

(4) Drag and drop a program file that you want to rewrite (for instance, LZXXXX_$.upd) onto

the Brother Maintenance USB Printer icon in the screen shown above.

(5) Upon completion of rewriting, the machine restarts and returns to the ready state

automatically.

(6) Disconnect the USB cable from the machine.

Note:

- It is recommendable to rewrite 1) Panel firmware, 2) Sub firmware and 3) Main firmware

in this order.

- DO NOT unplug the power cord of the machine or your computer or disconnect the USB

cable while rewriting the program files.

Note:

After rewriting Panel firmware, Sub firmware or Main firmware is completed, the

machine returns to the ready state. To continue rewriting the other program files, turn

off the power switch of the machine, and turn it on again as pressing the

buttons.

Check that "

" appears on the LCD and start rewriting.

Summary of Contents for 09055CDN















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 09055CDN

Reviews:

Related manuals for 09055CDN

Brands by name

Popular brands

Brother 09055CDN, Service Manual

Search results

Summary of Contents for 09055CDN

Reviews:

Related manuals for 09055CDN

Brands by name

Popular brands