APPENDIX A - 3
NC9100h_FM6.0
Appendix B
Reloading firmware using BRAdmin Professional
Utility
General
The firmware on the NC-2200w is stored in flash memory. This
means that you can upgrade the firmware by downloading the
appropriate update file. To get the latest firmware update, visit the
Brother Solutions web site at http://solutions.brother.com/
Because of this, we STRONGLY recommend that you make a note
of the current print server configuration before you upgrade. To do
this, print out a Network configuration page. To learn how to print the
Network Configuration Page, see Test Button on page 1-4.
Reloading firmware
1
Select the appropriate device on the list.
2
Select Load Firmware from Control.
3
Enter the Firmware File name and the password and then click
Load. Reloading process will start.
4
Status LED of the NC-2200w blinks. Don’t turn off the NC-
2200w power switch until the NC-2200w returns to ready.
Only Link LED lights when the NC-2200w returns to ready.
Some software versions that we provide will automatically
factory reset your print server parameters. We try to avoid
doing this. However, if we add a significant new feature to our
NC-2200w, it can result in the print server being factory reset.
