background image

15

NOTICE

The Ringer Equivalence Number is an indication of the maximum number of devices allowed to 
be connected to a telephone interface. The termination on an interface may consist of any 
combination of devices subject only to the requirement that the sum of the RENs of all the devices 
does not exceed five.

L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui 
peuvent être raccordés à une interface téléphonique.  La terminaison d’une interface peut 
consister en une combinaison quelconque de dispositifs, à la seule condition que la somme 
d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.

Laser safety (For 110-120V Models Only)

A

This equipment is certified as a Class 1 laser product as defined in IEC60825-1:2007 
specifications under the U.S. Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This 
means that the equipment does not produce hazardous laser radiation.

Since radiation emitted inside the equipment is completely confined within protective housings 
and external covers, the laser beam cannot escape from the product during any phase of user 
operation.

FDA regulations (For 110-120V Models Only)

A

U.S. Food and Drug Administration (FDA) has implemented regulations for laser products 
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the 
United States. One of the following labels on the back of the product indicates compliance with 
the FDA regulations and must be attached to laser products marketed in the United States.

WARNING

 

Use of controls, adjustments or performance of procedures other than those specified in this 
manual may result in hazardous invisible radiation exposure.

Internal laser radiation 

Max. Radiation Power: 20 mW

Wave Length: 770 - 800 nm

Laser Class: Class 3B

 

Manufactured:

BROTHER TECHNOLOGY (SHENZHEN) LTD.

NO6 Gold Garden Ind., Nanling Buji, Longgang, Shenzhen, China

This product complies with FDA performance standards for laser products except for deviations pursuant 
to Laser Notice No. 50, dated June 24, 2007.

Summary of Contents for 4570CDW





















Reviews: