A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
7 - 1
7
ZleMFC-US-FAX-4750e/5750e-
7
Auto Dial Numbers and
Dialing Options
Storing Numbers for Easy Dialing
You can set up your machine to do three types of easy dialing: One Touch,
Speed Dial, and Groups for Broadcasting of faxes. You can store names with
these numbers for easy identification.
Storing One Touch Dial Numbers
You can store 32 fax/phone numbers that you can dial by
pressing one key (and
Fax Start
). To access numbers 17
to 32, hold down the
Shift
key. When you press a One
Touch dial location, the LCD shows the name or number
as the call is dialed. (See
One Touch keys are the 16 keys (numbers 01–32) located on the left side of the control panel.
1
Press
Menu
,
2
,
3
,
1
.
2
Press the One Touch key where you want
to store a number.
The LCD shows the location you selected.
3
Enter a number (up to 20 digits) and then press
Set
.
Changing One Touch and Speed Dial Numbers
4
Use the dial pad to enter the name (up to 15
characters), and then press
Set
. You can use the
chart on Page 4-4 to help you enter letters—
OR
—
Press
Set
to store the number without a name.
5
Return to Step 2 to store another One-Touch number—
OR
—Press
Stop/Exit
.
When you dial an auto dial number, the LCD shows the name you’ve stored, or
if you haven’t stored a name, the number you’re stored.
If you must wait for another dial tone at any point in the dialing sequence, store
a pause at that point in the number by pressing
Redial/Pause
. Each key press
adds a 3.5 second delay.
If you lose electrical power, auto dial numbers stored in memory will
not
be
lost.
(For USA only) One-Touch key
1
has been pre-programmed for the Brother
fax-back system.
If you want to enter a pause in the dialing sequence (for example, to access an outside
line), press
Redial/Pause
as you’re entering digits. A dash appears on the LCD,
pressing
Redial/Pause
enters a 3.5 second pause when the number is dialed.
1 . O N E - T O U C H D I A L
N A M E :
E N T E R & S E T K E Y
