Brother 882-C40 Operational Manual Download

Page: 205 / 332

SELECTING PATTERNS

Em
br

oide

Embroidering

E-5

Selecting Character Patterns

Example:

Entering “We Fly”.

Press .

Press the key of the font you want to
embroider.

Press to change the selection screens.

Press

and then enter “W”.

If you want to change the size of a character, select

the character and then press

to change the

size. The size changes each time you press the key,
from large to medium to small.

If you make a mistake, press

to erase the

mistake.

If the pattern is too small to see clearly, you can use

the

key to check it.

Press

and enter “e”.

Press

to enter a space.

Memo

• If you continue adding characters after

changing the size, the new characters will
be entered in the new size.

• You cannot change the size of the entered

characters after combining character stitch
patterns.

Summary of Contents for 882-C40













































































































































































































































































































































Search results

Summary of Contents for 882-C40

Reviews:

Related manuals for 882-C40

Brands by name

Popular brands

Brother 882-C40, Operational Manual

Search results

Summary of Contents for 882-C40

Reviews:

Related manuals for 882-C40

Brands by name

Popular brands