Brother 882-S85 Operation Manual Download

Page: 122 / 276

SEWING THE STITCHES

110

Multi-directional Sewing
(Straight Stitch and Zigzag Stitch)

Use these stitch patterns to attach patches or
emblems to pant legs, shirt sleeves, etc.

Remove the flat bed attachment to create
the free arm function.

Select

and attach monogramming foot

“N”.

Set the needle in the fabric at the sewing
start point, and sew seam “1” as shown.

Start Point

Select

and sew seam “2” as shown.

The fabric will move sideways, so guide the fabric
by hand to keep sewing straight.

Select

and sew seam “3” as shown.

→

The fabric feeds forward while stitching backward.

Select

and sew seam “4” as shown.

→

The seam will be connected to the starting point of
seam 1.

Memo

Pass the free arm through a tubular piece of
fabric, and then sew in the order shown in the
illustration.

Memo

For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of this
manual.

Summary of Contents for 882-S85





















































































































































































































































































Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands

Brother 882-S85, Operation Manual

Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands