Brother 882-S85 Operation Manual Download

Page: 164 / 276

SELECTING PATTERNS

152

Selecting Alphabet Character
Patterns

Press .

Press the key of the font you want to
embroider.

Press

to change the

selection screen, and then enter the
characters that you want to embroider.

To enter a space, press

If you want to change the size of a character, select

the character and then press

to change the

size. The size changes each time you press the key,
from large to medium to small.

If you make a mistake, press

to erase the

mistake.

If the pattern is too small to see clearly, you can use

the

key to check it.

Memo

If you continue adding characters after chang-
ing the size, the new characters will be
entered in the new size.

You cannot change the size of the entered
characters after combining character stitch
patterns.

Summary of Contents for 882-S85





















































































































































































































































































Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands

Brother 882-S85, Operation Manual

Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands