Brother 882-S85 Operation Manual Download

Page: 183 / 276

ADJUSTMENTS DURING THE EMBROIDERY PROCESS

de
ry

171

If the Thread Breaks During
Sewing

Press the “Start/Stop” button to stop the
machine.

If the upper thread is broken, redo the

upper threading. If the bobbin thread is

broken, press

and follow the

directions in steps

through

from the

previous section to reset the bobbin.

Press .

Press

, or

to move the

needle back the correct number of stitches
before the spot where the thread broke.

If you cannot move back to the spot where the

thread broke, press

to select the color and

move to the beginning position of that color, then

use

, or

to move ahead to

slightly before where the thread broke.

Press

to return to the original

screen.

Press the “Presser Foot Lifter” button to
lower the presser foot, and press the “Start/
Stop” button to continue sewing.

Summary of Contents for 882-S85





















































































































































































































































































Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands

Brother 882-S85, Operation Manual

Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands