Brother 882-S85 Operation Manual Download

Page: 193 / 276

REVISING THE PATTERN

de
ry

181

Press .

Start position

→

The needle position moves to the bottom left corner
of the pattern (the embroidery frame moves so that
the needle is positioned correctly).

Press .

Use

to align the needle and the

mark on the fabric, and begin embroidering
the pattern.

Changing the Size

Press .

Select the direction in which to change the
size.

Press

to enlarge the pattern proportionately.

Press

to shrink the pattern proportionately.

Press

to stretch the pattern horizontally.

Press

to compact the pattern horizontally.

Press

to stretch the pattern vertically.

Press

to compact the pattern vertically.

Press

to return the pattern to its original

appearance.

Size of the pattern

Press

to return to the original

screen.

Memo

• Some patterns or characters can be

enlarged more than others.

• Some patterns or characters can be

enlarged to a greater degree if they are
rotated 90 degrees.

Summary of Contents for 882-S85





















































































































































































































































































Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands

Brother 882-S85, Operation Manual

Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands