Brother 882-S85 Operation Manual Download

Page: 204 / 276

USING THE MEMORY FUNCTION

192

Press

when there is a subfolder to

sort two or more stitch patterns to USB
media, the embroidery pattern in the
subfolder is displayed.

Press

to return to the original screen

without recalling.

Folder name

Embroidery patterns in a folder

Path

→

The path to shows the current folder at the top of the
list.
Embroidery patterns and subfolders within a folder
are displayed.

Press

to return to the previous folder.

Press the key of the pattern you want to
retrieve.

Press

to return to the original screen.

Press .

→

The sewing screen is displayed.

Recalling from the Computer

Plug the USB cable connector into the
corresponding USB port connectors for the
computer and for the machine (see page
190).

On the computer, open “My Computer”
then go to “Removable Disk”.

Summary of Contents for 882-S85





















































































































































































































































































Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands

Brother 882-S85, Operation Manual

Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands