Brother 882-S85 Operation Manual Download

Page: 223 / 276

EDITING PATTERNS

de
ry

211

Use

to select one of the thread

brands in the machine.

Use

to enter a color’s 4-digit number.

If you make a mistake, press

to erase the

entered number, and then enter the correct number.

Thread brand

Press .

Thread brand

Entered number

→

The selected thread color is set in the custom thread
table.

Repeat the previous steps until all desired
thread colors are specified.

To delete a specified color from the palette, press

Press

to return to the original

screen.

■

Adding a Color to the Custom

Thread Table from the List

Repeat the previous steps

through

Press

to display the thread list.

Use

to select a thread color.

Thread list

Thread brand

Note

• If

is not pressed, the thread color num-

ber will not be changed.

Summary of Contents for 882-S85





















































































































































































































































































Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands

Brother 882-S85, Operation Manual

Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands