Brother 882-S85 Operation Manual Download

Page: 226 / 276

EDITING PATTERNS

214

Select the direction in which the pattern
will be repeated.

Vertical direction

Horizontal direction

Repeating and deleting keys

Spacing keys

→

The pattern direction indicator will change
depending on the direction selected.

Use

to repeat the pattern on top and

to repeat the pattern at the bottom.

To delete the top pattern, press

To delete the bottom pattern, press

Adjust the spacing of the repeated pattern.

To widen spacing, press

To tighten spacing, press

Complete repeated patterns by repeating
steps

through

Press

to finish repeating.

Memo

You can only adjust the spacing of patterns
enclosed in the red frame.

Memo

• When there are two or more patterns, all

patterns will be grouped together as one
pattern in the red frame.

• When changing the direction in which the

pattern will be repeated, all of the patterns in
the red frame will automatically be grouped

as one repeating unit. Press

change a repeated pattern back to one sin-
gle pattern. See the following section on
how to repeat one element of a repeated
pattern.

Summary of Contents for 882-S85





















































































































































































































































































Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands

Brother 882-S85, Operation Manual

Search results

Summary of Contents for 882-S85

Reviews:

Related manuals for 882-S85

Brands by name

Popular brands