Brother 882-S85 Operation Manual Download | Manualshive

Page: 66 / 276

background image

USEFUL FUNCTIONS

54

a

Select a stitch.

b

Press

to select the pivot setting.

→

The key appears as

.

c

Place the fabric under the presser foot with
the needle at the starting point of the
stitching, and then press the “Start/Stop”
button. The machine will begin sewing.

d

Press the “Start/Stop” button to stop the
machine at the point where the sewing
direction changes.

→

The machine stops with the needle in the fabric, and
the presser foot is raised.

e

Rotate the fabric, and then press the “Start/
Stop” button.

→

The presser foot is automatically lowered, and
sewing continues.

Note

• The “NEEDLE POSITION” (P. 2 of the set-

tings screen) must be set in the down posi-

tion

for the pivot function to be used.

When “NEEDLE POSITION” is set in the

raised position,

appears as light gray

and cannot be used.

• When the setting is selected, the pivot func-

tion can only be used with stitches where
presser foot J or N is indicated in the upper-
left corner of the screen. If any other stitch is

selected,

appears as light gray and is

not available.

• Since the presser foot is fully raised when

the automatic thread cutting key is pressed,
press the “Presser Foot Lifter” button to
lower the presser foot, and then press the
“Start/Stop” button to continue sewing.

• If the pivot setting is selected,

and

beside “PRESSER FOOT HEIGHT” in the
settings screen are not available and the
setting cannot be changed.

Memo

If you press the “Start/Stop” button to pause
sewing, then press it again to continue,
reverse stitches (or reinforcement stitches) will
not be sewn.

«
...
64
65
66
67
68
...
»

Summary of Contents for 882-S85





















































































































































































































































































Reviews:

No comments

Related manuals for 882-S85

SmartBase PC1270D

Brand: Canon Pages: 88

Brand: UNIS Pages: 19

Brand: Fellowes Pages: 4

Brand: Nilfisk-ALTO Pages: 84

FLEX-A-LITE 2600

Brand: B&G Pages: 4

PhoneMate TC-520

Brand: Casio Pages: 40

Brand: Singer Pages: 33

Brand: Ehle Pages: 20

Brand: FONESTAR Pages: 16

Brand: Radio Shack Pages: 20

Brand: Sagem Pages: 2

Brand: Olivetti Pages: 64

Brand: Kärcher Pages: 237

Brand: Janome Pages: 45

Brand: Miele Pages: 108

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands