APPENDIX
157
7
Split embroidery patterns created with PE-DESIGN
Ver.7 or later, or PE-DESIGN NEXT can be
embroidered. With split embroidery patterns,
embroidery designs larger than the embroidery
hoop are divided into multiple sections, which
combine to create a single pattern after each
section is embroidered.
For details on creating split embroidery patterns
and for more detailed sewing instructions, refer to
the Instruction manual included with PE-DESIGN
Ver.7 or later, or PE-DESIGN NEXT.
The following procedure describes how to read
the split embroidery pattern shown below from
USB media and embroider it.
a
Connect to the machine the media
containing the created split embroidery
pattern, and then select the split
embroidery pattern to be embroidered.
*
For details on recalling patterns, refer to
“Embroidery cards (optional)” on page 112,
“Recalling from USB media” on page 116, or
“Recalling from the computer” on page 117.
→
A screen appears so that a section of the split
embroidery pattern can be selected.
b
Select section
to be embroidered.
*
Select the sections in alphabetical order.
*
A maximum of 9 sections can be displayed in one
page. If there are 10 or more sections in the pattern,
press
or
to display the previous or next
page.
c
Touch .
d
If necessary, edit the pattern.
*
For details, refer to “Editing the Embroidery Pattern
(Pattern Editing Screen)” on page 119.
Embroidering Split Embroidery Patterns
Summary of Contents for 882-T51
