Brother 882-W04 Operation Manual Download

Page: 332 / 376

ENTERING STITCH DATA

330

Select whether one stitch or three stitches
will be sewn between the first two points.

To sew three stitches, press the key so that it appears

as .

Use

to move

to the second point

and press

Repeat the steps above for each point that
you have drawn on the grid sheet until the
stitch design is drawn on the screen as a
continuous line.

Press

to delete a selected point entered.

Press

to sew a test-run of the stitch.

Press

to return to the original screen.

Press

to view an image of the stitch.

Memo

• If you have entered points that are too close

together, the fabric may not feed properly.
Edit the stitch data to leave a larger space
between points.

• If the stitch design is to be repeated and

linked, make sure that linking stitches are
added so that the stitch designs will not
overlap.

Linking stitches

• You can touch on the grid sheet to set the

point, or you can also use a USB mouse.

Summary of Contents for 882-W04

























































































































































































































































































































































































Search results

Summary of Contents for 882-W04

Reviews:

Related manuals for 882-W04

Brands by name

Popular brands

Brother 882-W04, Operation Manual

Search results

Summary of Contents for 882-W04

Reviews:

Related manuals for 882-W04

Brands by name

Popular brands