LOWER THREADING
48
LOWER THREADING
Winding the Bobbin
Press
→
→
→
→
in this order to display a
video example of bobbin winding on the LCD (see
page 46). Follow the steps explained below to
complete the operation.
■
Using the Supplemental Spool Pin
With this machine, you can wind the bobbin during
sewing. While using the main spool pin to sew
embroidery, you can conveniently wind the bobbin
using the supplemental spool pin.
a
Supplemental spool pin
a
Turn the main power to ON and open the
top cover.
b
Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
a
Groove in the bobbin
b
Spring on the shaft
CAUTION
• The included bobbin was designed specifically
for this sewing machine. If bobbins from other
models are used, the machine will not operate
correctly. Use only the included bobbin or
bobbins of the same type (part code: SA156,
(SFB: XA5539-151)).
*
Actual size
a
This model
b
Other models
c
11.5 mm (approx. 7/16 inch)
Summary of Contents for 882-W04
