25
Caring for Your Machine
CAUTION
Make sure the power to the
machine is off before cleaning
sewing machine.
Turn machine off.
1
Remove presser foot.
2
Remove needle plate.
3
Clean out dust and thread
4
scraps.
Thread scraps can be swept out
✽
through the bobbin door.
When the area under the needle
5
plate is cleaned out, oil the hook
of bobbin case with sewing
machine oil.
Use a cloth to clean the machine
✽
of any excess oil.
Use only good quality sewing
✽
machine oil.
Attach needle plate and presser
6
foot.
Hook
Lubrication Points
When using the sewing machine
●
every day, apply a few drops of
oil* to each location indicated
twice a month.
Use a cloth to wipe the machine
✽
clean of any oil spilled near the
lubrication points.
Use only good quality sewing
*
machine oil.
Cleaning the Machine
Keep Your Sewing Machine Clean
■
Please use a soft, dry cloth to wipe off light dirt and
dust. If sewing machine is very dirty, wipe with a cloth
soaked in warm water, or in warm water containing a
neutral detergent. Then wipe off any detergent residue,
and wipe off any excess water with a dry cloth.
Precautions
■
Please keep sewing machine away from heat sources
such as irons and space heaters. Do not use chemicals
like benzine or thinner to clean your machine. When
machine is not in use, please keep machine out of
direct sunlight.
Item
Specification
Sewing Speed
(maximum)
1,500 stitches per minute
Stitch Length
(pitch)
0 – 7 mm
Stroke of
Needle
34.1 mm
Stroke of
Thread Take-
Up Lever
64.7 mm
Foot Height
Foot Lift
One
6 mm
Two
9 mm
Knee Lifter
Over
10 mm
Item
Specification
Height of feed dog
0.7 mm, 1.1 mm
Height of
lower needle
3 mm – 3.5 mm
Needles that
may be used
HLX5#9 – #18
SCHMETZ 130/705H #65 – #110
Bed dimensions
439 mm × 178 mm (17 1/4 × 7 inches)
Total weight
11 kg (24 1/4 lbs.)
Sewing Light
LED
Sewing area
595 mm × 285 mm
(23 3/8 × 11 1/4 inches)
