Embroidery Step by Step
Basic operations
B-25
ST
AR
T
ING T
O
EMBR
O
IDE
R
B
Follow the steps below to prepare the machine for embroidery.
Chapter
2
STARTING TO
EMBROIDER
Embroidery Step by Step
Step 2
Step 1
Step 4
Step 5
Step 3
Step 6, 7
Step 8
Step #
Aim
Action
Page
1
Checking the needle
Use needle 75/11 for embroidery. *
B-23
2
Embroidery unit attachment
Attach the embroidery unit.
B-26
3
Bobbin thread setup
For the bobbin thread, wind embroidery bobbin thread and set it in place.
B-17
4
Fabric preparation
Attach a stabilizer material to the fabric, and hoop it in the embroidery frame.
B-29
5
Embroidery frame attachment
Attach the embroidery frame to the embroidery unit.
B-35
6
Pattern selection
Turn the main power to on, and select an embroidery pattern.
B-9
7
Checking the layout
Check and adjust the size and position of the embroidery.
B-35
8
Embroidery thread setup
Set up embroidery thread according to the pattern.
B-28
*
It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.).
