50
The outlines of the selected patterns are welded.
Note
•
This function welds the outermost outline of the
patterns. When welding certain types of
patterns that have inside areas cut out, the cut-
out areas are not used to create the outline. Be
sure that the welded patterns in the preview
area meet your wishes before completing the
procedure.
-
Welding built-in characters
-
Welding character images created by
scanning
Adding an Offset Line to the Pattern
An offset line can be added to the selected pattern.
Offset line setting can be used for cutting, drawing
and other premium functions.
a
Touch
in the object editing screen, and
then add an offset line to the pattern.
• The selected original design/pattern appears in
green.
• The newly added offset line appears in black.
• After the offset distance has been specified, it
cannot be changed. First, delete the added offset
line and then display the offset setting screen to
add a new offset line.
b
Touch
or
to adjust the setting.
• Specify a negative setting for “Offset Distance” to
create an offset line inside the pattern, or specify a
positive setting to create an offset line outside the
pattern.
a
Offset line
b
Original pattern
Memo
• If a positive setting was specified to create an
offset line outside the pattern, the corners of
the offset line will be beveled.
1 2
1 2
