62
Using Drawing Functions to Fill
Patterns/Make Outlines Thicker
Precautions for Using the Fill Function
●
Depending on the material and pen being used,
material drawn with a filled pattern may be
difficult to peel off or may tear. Perform test/trial
drawing with the pattern to be used in your
project.
●
An open pattern cannot be filled.
Example:
●
When fill settings are specified, the settings are
applied to all patterns in the pattern layout screen.
●
Fill and additional line settings cannot both be
specified for the same pattern.
■
Filling Patterns
a
Touch
in the object editing screen.
Settings screen
a
Fill
Select whether or not to fill patterns.
b
Fill Pattern
c
Fill Line Spacing
Adjust the spacing of the lines filling the pattern.
d
Fill Direction
Adjust the direction of the fill pattern.
■
Making Pattern Outlines Thicker
Additional lines can be drawn to make pattern outlines
appear thicker.
a
Touch
in the object editing screen to
display the outline settings screen.
Settings screen
Note
• The settings for “Number of Additional Line”
and “Additional Line Spacing” will not be
applied to patterns with fill settings applied.
a
Additional Line
Select whether or not lines are to be added.
b
Number of Additional Line
Specify the number of lines to be added.
a
b
c
d
a
b
c