4-6
Confidential
1.7
Setting Serial Number
(1) Press and hold the
key for five seconds or longer when the machine is in the ready
state. LEDs except WiFi LED light.
(2) Press the [to USB], [to Network Device2], and [to Network Device1] keys in this order. The
to USB, Error,
, and
LEDs light and the machine enters the maintenance mode.
(3) Connect the computer to the machine with the USB cable.
(4) Turn ON the computer.
(5) Extract the "brusbsn.zip" file that was copied into the temporary folder, and double-click
"brusbsn.exe" to start it.
(6) In the [Product Category] field, select the [4 Other - Model].
(7) Choose "ADS 2013 MODEL" in the left box of the BrUsbSn window.
(8) In the [Port] field, select the port number assigned to the Brother Maintenance USB Printer.
If the port number is unknown, follow the steps below to check it.
1) Click [Start], [Settings], and [Printers and Faxes]. The Printers and Faxes window
appears.
2) Right-click the "Brother Maintenance USB Printer" icon.
3) Click [Properties]. The Brother Maintenance USB Printer Properties window appears.
4) Click the [Ports] tab. The Brother Maintenance USB Printer port number is displayed.
(9) Enter the serial number (15 digits) of the machine in the [Serial No] field, and click the [OK]
button.
(10) Check that the CHECK window appeared on the screen, and click the [Yes] button. The
serial number is written to the machine.
(11) Disconnect the USB cable.