Chapter 9 Error code List
BAS-6150
99
E-403
E-404
E-405
E-500
E-501
E-502
E-503
E-550
E-551
E-552
E-553
E-554
E-580
E-600
E-601
E-602
E-700
E-701
E-702
E-703
E-710
E-711
E-712
E-713
E-714
E-720
E-721
E-722
E-723
E-724
Front edge of left flap could not be detected
Back edge of right flap could not be detected
Back edge of left flap could not be detected
EMERGENCY STOP switch pressed
EMERGENCY STOP switch pressed during sewing
EMERGENCY STOP switch not connected
EMERGENCY STOP switch pressed during feeding
Abnormal voltage in 24 V system
Abnormal voltage in 30 V system
Abnormal voltage in 55 V system
Abnormal rise in primary power supply voltage
Abnormal drop in primary power supply voltage
Main PCB heat sink cooling fan has stopped
Right and left upper thread breakage
Right upper thread breakage
Left upper thread breakage
No main ROM
No sewing ROM
No machine motor ROM
Abnormal of CPLD for IM
Memory read/write error
Program data corrupted
Cycle program data corrupted
General parameter corrupted
Counter data corrupted
Main PCB communication error
Panel PCB communication error
Sewing PCB communication error
Main PCB communication error
Motor PCB communication error
Press RESET switch.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Confirm the emergency stop switch is connected. Turn off
the power supply.
Press RESET switch.
Check the voltage and turn off the power supply.
Check the voltage and turn off the power supply.
Check the voltage and turn off the power supply.
Check the voltage and turn off the power supply.
Check the voltage and turn off the power supply.
Turn off the power supply.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Turn off the power supply.
Turn off the power supply.
Turn off the power supply.
Turn off the power supply.
Turn off the power supply.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Press RESET switch.
Description
Error Code
Corrective action
Summary of Contents for BAS-6150
