Chapter 1 Machine Preparation
BAS-6150
10
Model
151-6150
Head
118-U73 (the machine with double needles and center knife)
Sewing speed
Maximum 3000rpm
(3000, 2800, 2500, 2200, 2000, 1800, 1500, 1200, 1000, 800, 500, 200 rpm)
Welting
Parallel double welting, parallel single welting (with flap, without flap)
Standard pitch
Standard 2.4 mm (1.8 - 3.4mm)
Condense
Standard 1mm (0.4 - 2.0mm)
Standard 1mm (0.8 - 3.4mm)
Minimum
30mm (center knife ON), 15mm (center knife OFF)
Maximum
220mm (standard), 250mm (option)
Program number
10 (enable to copy)
Cycle program number
5 (4 prgrams/1 cycle, stacker movable in the middle)
Lower thread counter
0 - 999 (disable when remaining amount detection device in use)
Sensor check function
Display of conditions of sensors, switches, etc
Needle gauge
8, 10, 12, 14, 16, 18, 20 mm (Standard: 12mm)
Needle to be used
Mtx190#16 (#14 - #18)
Rotary hook
Horizontal double hook
Power
3 phase 200V,220V,380V,400V,415V, 600VA
Air pressure/air consumption
0.49Mpa, 10l /min
Weight
225kg
Dimensions
W1,010mm x D1,350mm x H1,200mm
1. Specifications
Stitch
length Back tack
pitch
V.N. back
tack
Seam
length
Summary of Contents for BAS-6150
