Chapter 2 Sewing flow
BAS-6150
28
1. Outline of operation
1-1. Description of the panel
q
"RESET"
Press the "RESET" key when an error is displayed or the machine stops due to a trouble. The
error is released when the cause for the trouble is solved. If pressed while the lower thread
counter ([COUNTER] LED is ON) is displayed, the production counter appears.
w
"FEED"
Press the "FEED" key to move the carriage feed forward and backward. If pressed when the
carriage feed is placed at other positions than the feed position, the carriage feed moves to
the feed position. If pressed when the carriage feed is placed at the feed position, it moves to
the standby position. When the carriage feed is placed at the feed position, LED blinks.
* When the setting for the memory switch 3 (environment parameter No.63) is set to ON,
press the "ENTER" key
y
with the "FEED" key
w
being pressed.
e
"NDL THREAD CUT" (upper thread cut)
The upper knife comes out only while the key is pressed and trims the upper thread as it
retracts when the key is released when the carriage feed is at the feed position.
r
"BBN.THREAD CUT" (lower(bobbin) thread cut)
The lower knife comes out only while the key is pressed and trims the lower thread as it
retracts when the key is released when the carriage feed is at the feed position
t
"SELECT"
Menu display
!3
is changed. If pressed while the production counter is displayed, the
production counter is set to 0.
y
"ENTER"
Contents of the displayed menu are set to be configurable.
1457S
The lamp turns on when the power
supply switch is set to ON.
t
q
w
e
r
y
i
o
!3
!2
u
u
!0
!1
!4
Summary of Contents for BAS-6150
