Chapter 2 Sewing flow
BAS-6150
38
3. Machine stop
3-1. How to stop the machine
3-2. Machine stop reset
Error codes [E500], [E501], and [E503] are displayed in the contents display window
q
on the
control panel when the emergency stop switch is push turn locked.
1.
Rotate the emergency stop switch clockwise and the knob of the switch pops up to release
the lock.
2.
The emergency stop is released when the "RESET" key
w
is pressed. If the emergency stop
switch is pressed in sewing, press the start switch furthermore. (The feeder moves to the
feed position.)
1472S
Machine operation can be stopped by pressing
the emergency stop button. The emergency
stop button is of push turn lock type.
1457S
3-3. Post-process after the machine stop due to errors
If an error is displayed when the power supply is on or in sewing, check the corrective action for
error codes displayed in the contents display window
q
by referring to [Chapter 9. Error Code
List]. After checking, press the "RESET" KEY
w
.
OF
F
O N
q
w
Summary of Contents for BAS-6150
