14
3. Operation
3
Press
e
. The writing surface begins scrolling after 1 to 2 seconds, and then
the front writing surface is printed.
OR
Press
d
. The writing surface begins scrolling after 1 to 2 seconds, and
then both writing surfaces are printed at the same time.
b
Do not try to erase or touch the writing surface while it is moving.
Do not try to scan and print pages affixed to the writing surface.
+
Depending on the type of markers used, some colors may not be printed.
4
Tear off the printout by holding the side of the paper and pulling it upward
and across.
b
Do not touch the paper being fed out of the printer until it has finished
printing.
5
To erase the writing surface, use the enclosed eraser.
b
Always keep the writing surface clean. However, do not wipe the writing
surface with paint thinner, alcohol, benzene, or paper towels.