5 - 21
TROUBLESHOOTING AND ROUTINE MAINTENANCE
4
Remove the cartridge covers.
5
Each color has its own correct position. Keep the ink cartridge
in an upright position when you insert it into slot. Press down on
the ink cartridge until the hook snaps over it.
6
Lift the scanner cover to release the lock. Gently push the
scanner cover support down and close the scanner cover.
7
If you replaced an ink cartridge while
Near Empty
was
displayed on the LCD, the LCD may ask you to verify that it was
a brand new one. Example:
Did You Change
Blck?
▲
Yes
▼
No
. For each
new
cartridge you installed, press
(
Yes
) to
automatically reset the ink dot counter for that color. If the ink
cartridge you installed is not a brand new one, please be sure to
select
(
No
).
Do not touch the area shown in the illustration above.
If the cartridge cover comes off when you open the bag the
cartridge will not be damaged.
DO NOT TOUCH
Cartridge Cover
New Ink Cartridge
Ink Cartridge Hook