1-18
Confidential
■
Error code 9F
Paper empty (It is detects by the registration front sensor)
■
Error code A1
Front cover open
■
Error code A2
The document is too long. (During scanning, 90 cm or longer of a document is detected.)
No paper
Reload paper, then press start.
User Check
• Replenish the paper in the paper tray.
Step
Cause
Remedy
1
Registration front actuator
catching in some position
Re-assemble the registration front actuator.
2
Registration front sensor PCB
harness connection failure
Check the harness connection of the
registration front sensor PCB and
reconnect it.
3
Registration front sensor PCB
failure
Replace the registration front sensor PCB.
4
Main PCB failure
Replace the main PCB ASSY.
Cover is open
Close the Front Cover.
User Check
• Close the front cover.
Step
Cause
Remedy
1
Harness connection failure of
cover sensor harness ASSY.
Check the harness connection of the cover
sensor harness ASSY, and reconnect it.
2
Cover sensor harness ASSY
failure
Replace the cover sensor harness ASSY.
3
Main PCB failure
Replace the main PCB ASSY.
Document Jam.
Clear the scanner jam, then press the Stop Key.
User Check
• Check if the document is jammed in the ADF. If it is jammed, remove it.
Step
Cause
Remedy
1
Document rear actuator not
operating smoothly or catching in
some position.
Ensure smooth operation and that there is
no catching of document rear actuator.
Summary of Contents for DCP-7030
