background image

Product Safety Guide

5

(DSmobile DS-940DW only)

DO NOT disassemble or modify the rechargeable 

Li-ion battery.

(DSmobile DS-940DW only)

DO NOT dispose of the rechargeable Li-ion 

battery in fire or intentionally overheat. This could 

cause the internal insulation to melt, gas to be 

emitted, or safety mechanisms to fail. Additionally, 

the electrolyte solution could catch fire.

(DSmobile DS-940DW only)

DO NOT puncture the rechargeable Li-ion 

battery with any objects, subject it to severe 

shocks or throw it. Damage to the rechargeable 

Li-ion battery's protection circuit could cause the 

rechargeable Li-ion battery to be recharged at an 

abnormal current/voltage or cause an abnormal 

chemical reaction within the rechargeable Li-ion 

battery.

(DSmobile DS-940DW only)

DO NOT incinerate the rechargeable Li-ion battery 

or dispose of it with household waste.

 WARNING

(DSmobile DS-940DW only)

Keep the rechargeable Li-ion battery away from 

infants. If ingested, contact emergency services 

immediately.

Store the USB cable bundled and out of the reach 

of children to avoid the risk of injury.

DO NOT disassemble or modify the scanner, 

otherwise a fire or electric shock may occur. If 

the scanner requires repair, contact your Brother 

dealer or Brother customer service.

(DSmobile DS-940DW only)

Stop using the rechargeable Li-ion battery if there 

are noticeable abnormalities such as smell, heat, 

deformities, or discoloration. Turn the power 

switch off immediately and remove the USB cable 

from the power source.

In the event that foreign material enters the 

scanner, turn the power switch off immediately and 

remove the USB cable. Contact the store where 

this scanner was purchased. This may result in a 

fire, electric shock, or device failure.

DO NOT place the scanner near radiators, 

heaters, air conditioners, water, chemicals 

or devices that contain magnets or generate 

magnetic fields. Doing so may create the risk 

of a short circuit or fire should water come into 

contact with the scanner (including condensation 

from heating, air conditioning, and/or ventilation 

equipment that may be sufficient to create a short 

circuit or fire).

DO NOT place the scanner near chemicals or in 

a place where chemical spillage could occur. In 

particular, organic solvents or liquids may cause 

the casing and/or cables to melt or dissolve, 

risking a fire or electrical shock. They may also 

cause the scanner to malfunction or become 

discolored.

Plastic bags are used in the packaging of the 

scanner. To avoid danger of suffocation, keep 

these plastic bags away from babies and children. 

Plastic bags are not toys.

DO NOT expose the scanner to direct sunlight, 

excessive heat, open flames, corrosive gasses, 

moisture or dust. DO NOT place the scanner on a 

carpet or rug, as this will expose it to dust. Doing 

so may create a risk of an electrical short or fire. 

It may also damage the scanner and/or render it 

inoperable.

Summary of Contents for DSmobile DS-640











Reviews: