[3]
Press the
CODE + FRAME
keys.
The message lamp indicates the F character with a period "F." and the
typewriter now allows you to draw a line.
[4]
Move the earner to the end o f the line by using the
(Return), {
(Index),
(Cursor Down),
or
CODE + J (Micro Index)
keys for a
vertical line; or the
SPACEBAR
or —>
(Cursor Left)
for a horizontal
line.
[5]
Press the
CODE + FRAME
keys.
The line is drawn and the message lamp then shows the current line
format number.
[6]
To draw additional lines, repeat steps 2 through 5.
Erasing Frames and Lines
Before you begin the following steps, be sure to select the TYPE mode.
Follow these steps to erase frames and lines:
[1]
Move the carrier to the starting point of the drawn frame or lines.
To move the carrier, use the carrier motion key such as CURSOR ( J ,,
, or —> ),
SPACEBAR, K— I (Backspace), — R (Tab), CODE
+
B TAB,
CODE
(Backspace 1), J (Index), { (Reverse Index),
CODE +
J (Micro Index),
C O D E +
J (Micro Reverse Index),
and
(Return)
keys.
[2]
Press the
CODE
+
CORRECTION
keys.
[3]
Press the
CODE
+
FRAME
keys.
[4]
Move the carrier to the ending point of the drawn frame or lines.
If the frames or lines to delete are double-lines, press the double
underline key on the alphanumeric keyboard before going to the next step.
[5]
Press the CODE + FRA M E keys again.
The drawn frames and lines are erased.
113
