manualshive.com logo in svg

Brother Entrepreneur PR650e, Operation Manual

The Brother Entrepreneur PR650e Operation Manual is a crucial resource for users of this exceptional embroidery machine. Seamlessly combining innovation and functionality, the manual provides detailed instructions, troubleshooting tips, and expert advice. Download this essential manual for free at 88.208.23.73:8080, ensuring you maximize your creative potential with the PR650e.

Share
Download
background image

32

EMBROIDERING TUTORIAL 

——————————————————————————————————————————————————————————————————

Operating Precautions

The necessary points to ensure the correct operation of this machine are described below.

Power supply precautions

Be sure to observe the following precautions concerning the power supply.

WARNING

CAUTION

●

Use only regular household electricity for the power source. Using other power sources 
may result in fire, electric shock, or damage to the machine.

●

Make sure that the plugs on the power supply cord are firmly inserted into the electrical 
outlet and the power supply cord receptacle on the machine.

●

Do not insert the plug on the power supply cord into an electrical outlet that is in poor 
condition.

●

If any of the following occur, turn off the embroidery machine and unplug the power 
supply cord, otherwise a fire, an electric shock or damage to the machine may result.
• When you are away from the machine.
• After using the machine.
• If a power outage occurs while the machine is being operated.
• If the machine is not operating properly, for example, when there is a loose or cut con-

nection.

• During electrical storms.

●

Use only the power supply cord included with this machine.

●

Do not plug this machine in with extension cords or multi-plug adapters with many other 
appliances plugged into them, otherwise a fire or an electric shock may result.

●

Do not plug in or unplug the power supply cord with wet hands, otherwise an electric 
shock may result.

●

When unplugging the power supply cord, be sure to first turn off the machine, and then 
grasp the plug when unplugging the cord. Pulling on the cord may damage it or result in a 
fire or an electric shock.

●

Do not allow the power supply cord to be cut, damaged, modified, forcefully bent, pulled, 
twisted, or bundled. In addition, do not place heavy objects on the cord or expose it to 
heat, otherwise damage to the cord, fire or an electric shock may result. If the power 
supply cord or its plug is damaged, stop using the machine, and then take the machine to 
your authorized dealer for repairs before continuing use.

●

If the machine is not to be used for a long period of time, unplug the power supply cord, 
otherwise a fire may result.

●

When leaving the machine unattended, either the main switch of the machine should be 
turned to OFF or the plug must be removed from the socket-outlet.

●

When servicing the machine or when removing covers, the machine must be unplugged.

●

For U.S.A only
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of 
electrical shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a 
qualified electrician to install the proper outlet. Do not modify the plug in any way.

Summary of Contents for Entrepreneur PR650e

























































































































































































































































































Reviews:

No comments

Related manuals for Entrepreneur PR650e

IDEAL 8354 Operating Instructions Manual preview
8354
Brand: IDEAL Pages: 48
Adler Class 48 Instruction Book preview
Class 48
Brand: Adler Pages: 20
Matrix Fitness S3x Owner'S Manual preview
S3x
Brand: Matrix Fitness Pages: 26
Singer Heavy Duty 4452 Instruction Manual preview
Heavy Duty 4452
Brand: Singer Pages: 76
Racing MC S6 B Instruction Manual preview
MC S6 B
Brand: Racing Pages: 22
Rtech TIG401 Operation Instructions Manual preview
TIG401
Brand: Rtech Pages: 24
Singer FUTURA CE-200 User Manual preview
FUTURA CE-200
Brand: Singer Pages: 100
Fellowes PB 250E User Manual preview
PB 250E
Brand: Fellowes Pages: 4
National Flooring Equipment 14420 Instruction Manual preview
14420
Brand: National Flooring Equipment Pages: 25
Clipper CLP12IA Operating Instructions Manual preview
CLP12IA
Brand: Clipper Pages: 42
Singer 336K125 Parts List preview
336K125
Brand: Singer Pages: 15
Kärcher 1.246-022 Manual preview
1.246-022
Brand: Kärcher Pages: 260
Lavorwash SWL R1000 ET Instructions And Operating Manual preview
SWL R1000 ET
Brand: Lavorwash Pages: 21
Husqvarna BMP 265 Operator'S Manual preview
BMP 265
Brand: Husqvarna Pages: 76
Husqvarna PG 530 Operator'S Manual preview
PG 530
Brand: Husqvarna Pages: 92
Husqvarna BMS 150 Operator'S Manual preview
BMS 150
Brand: Husqvarna Pages: 100
Husqvarna PG 510 Operator'S Manual preview
PG 510
Brand: Husqvarna Pages: 80
Husqvarna BMP 215 Operator'S Manual preview
BMP 215
Brand: Husqvarna Pages: 84

Brands by name

Popular brands

Load more brands