46
Se viene visualizzato il seguente messaggio di errore
• Controllare che codice del CD e numero di
identificazione interno della macchina (N.) siano stati
inseriti correttamente e ripetere la procedura dal
passaggio
c
. Per chiudere il messaggio, fare clic su
OK
.
• Il codice del CD è valido per l'utilizzo soltanto con
uno specifico numero di identificazione interno
della macchina (N.).
Controllare che il codice del CD sia stato inserito
correttamente e ripetere la procedura dal passaggio
c
. Per chiudere il messaggio, fare clic su
OK
.
• Controllare la connessione Internet e fare
nuovamente clic su
Autentica
. Per chiudere il
messaggio, fare clic su
OK
.
j
Annotare il codice di autenticazione di 8 cifre
visualizzato.
k
Fare clic su
Fine
.
Se il programma più recente è già stato
installato nella macchina
Saltare i passaggi da
l
a
q
e iniziare la
procedura dal passaggio
r
.
l
Accendere la macchina da ricamo premendo
il pulsante Infilatura automatica.
Utilizzare un supporto USB o un computer per
installare l'applicazione di aggiornamento per il KIT
I
sulla macchina da ricamo.
Se si utilizza un
supporto USB
, fare riferimento alle
seguenti istruzioni.
Se si utilizza un
computer
, fare riferimento alla pagina
48.
Utilizzo di un supporto USB per l'installazione
m
Copiare
Applicazione di aggiornamento per il
KIT
I
(************.upf) dal CD-ROM sul
supporto USB.
Se è stato scaricato il programma più recente
al passaggio
f
, copiare il file
(************.upf) dal computer.
Nota
• Una volta completato l'aggiornamento della
macchina da ricamo al KIT
I
, occorre digitare il
codice di autenticazione nella schermata
Impostazioni della macchina da ricamo.
Nota
• I dati relativi all'applicazione di aggiornamento sono
contenuti nella cartella "PR-1000_PR1000e".
• Copiare solo l'
Applicazione di aggiornamento per
il KIT I
sul supporto USB; sul supporto non deve
trovarsi nessun altro file.
Summary of Contents for Entrepreneur Pro PR-1000
Page 83: ......