FD4
−
B276, B277 7/15
2000.5
Processing the work table
* This sewing machine is a fully-submerged type. Refer to the diagram below to prepare the work table and
the machine head support. Furthermore, if processing a folding-type work table, you will need parts which
are sold separately. (Refer to page 10.)
* The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and
withstand the vibration of the sewing machine.
Machine head support (when not using a solenoid presser foot lifter)
*1 Machine head support connection positions
*2 Motor mounting holes
*3 Depth 10
*4 Machine head support plate mounting holes
*5 Depth 8
*6 Chain guide mounting hole
