GT-3 Series
7. Troubleshooting
130
Error
code
Message
Meaning
Solution
1200
Exchange Maintenance Parts
1201
Exchange Maintenance Parts
Needs to exchange the Maintenance
Parts and to clean the printer.
Exchange the Maintenance Parts and clean the inside of
the printer. See "6-1. Replacing Consumables".
1210
Exhaust Fan Stop
The Fan to exhaust ink mist is stopped. **
2000
NO INK Black
Black Ink Cartridge is not installed.
Install a Black Ink Cartridge.
2001
NO INK Magenta
Magenta Ink Cartridge is not installed.
Install a Magenta Ink Cartridge.
2002
NO INK Cyan
Cyan Ink Cartridge is not installed.
Install a Cyan Ink Cartridge.
2003
NO INK Yellow
Yellow Ink Cartridge is not installed.
Install a Yellow Ink Cartridge.
2004
NO INK White-1
White 1 Ink Cartridge is not installed.
2005
NO INK White-2
White 2 Ink Cartridge is not installed.
2006
NO INK White-3
White 3 Ink Cartridge is not installed.
2007
NO INK White-4
White 4 Ink Cartridge is not installed.
Install a White Ink Cartridge.
2020
EMPTY Black
Black Ink Cartridge ran out of ink.
Replace to a new Black Cartridge.
2021
EMPTY Magenta
Magenta Ink Cartridge ran out of ink.
Replace to a new Magenta Cartridge.
2022
EMPTY Cyan
Cyan Ink Cartridge ran out of ink.
Replace to a new Cyan Cartridge.
2023
EMPTY Yellow
Yellow Ink Cartridge ran out of ink.
Replace to a new Yellow Cartridge.
2024
EMPTY White-1
White 1 Ink Cartridge ran out of ink.
2025
EMPTY White-2
White 2 Ink Cartridge ran out of ink.
2026
EMPTY White-3
White 3 Ink Cartridge ran out of ink.
2027
EMPTY White-4
White 4 Ink Cartridge ran out of ink.
Replace to a new White Cartridge.
2041
No Wiper Cleaner (CMYK)
The Wiper Cleaner for CMYK is not
installed.
Install the Wiper Cleaner to the CMYK side.
2042
No Wiper Cleaner (White)
The Wiper Cleaner or White is not
installed.
Install the Wiper Cleaner to the White side
2050 Temp
Low
The ambient temperature is under the
operative temperature rage.
Raise the room temperature.
2051 Temp
High
The ambient temperature is over
operative temperature rage.
Drop the room temperature.
2070
Obstacle on the Platen
The Clearance Sensor detected an
obstacle on the Platen (or the media) in
loading the Platen.
Remove the obstacle, flat the platen surface and then
press OK Button.
2100
USB flash drive Not Ready
USB flash drive is not properly
mounted.
Re-mount the USB flash drive. Confirm the spec and
type of the USB flash drive. See " 7-1. Solving Printer
Problems".
2101
Not Enough Area
The USB flash drive does not have
enough area for saving.
Check the free space of the USB flash drive with PC.
Mount a USB flash drive with free area available.
2102
USB flash drive Access Error
The mounted USB flash drive is out of
support, or USB flash drive is broken.
Check the spec and type of the USB flash drive. See "
7-1. Solving Printer Problems".
2105
No Files
No available data in the USB flash
drive.
Check the free space of the USB flash drive with PC.