HE-800B
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
45
5-8. Copying programs
To create a program with parameters that are almost exactly the same as those of another program, you can copy the original
program and change just the parts which need to be changed
.
1
Press any one of the following keys.
(Any one of these keys can be pressed.)
2
Press the COPY key.
(The sewing machine will switch to program copy mode.)
The program number for the copying source (1) and the program
number for the copying destination (2) before entering this mode
will appear in the display.
3
Select the program number for the copying source (1).
・
The program number for the copying source (1) changes in the
order shown in the illustration each time the
key is
pressed.(The
key changes the order in the opposite
direction.)
・
The program number for the copying source (1) and the
program number for the copying destination (2) must both be
program numbers for the same types of programs.
Independent program: P01
~
P50
Cycle program: C1
~
C9
4
Select the program number for the copying destination (2).
The program number for the copying source (1) and the program
number for the copying destination (2) must both be program
numbers for the same types of programs.
Independent program
Cycle program
Flashing
4810M
4808M
4787M
4809M
4811M
4812M
4792M
Flashing
Flashing