7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)
HE-800B
56
7-2-1. List of memory switch settings
No.
Setting items
Setting range
Default
value
001
Work clamp height when treadle is depressed
Settings can be made in units of 1 mm.
1
–
13
13
002
Work clamp height when treadle is at neutral position
Settings can be made in units of 1 mm.
1–13 10
003
Work clamp operation when treadle is depressed to the 1st step.
*
When using a triple pedal (optional part), this number will not be displayed.
1: Work clamp does not drop to intermediate position
2: Work clamp drops to intermediate position
1–2 1
004
Work clamp height (mm) when dropped to intermediate position
*
Displayed when No. 003 above is set to “2”.
Settings can be made in units of 0.1 mm.
0.1–8.0 1.0
300
Parameter number assignment for FUNC key
Functions can be assigned to the FUNC key to make it operate as a seventh
shortcut key.
OFF: No assignment
(The help screen is displayed while the FUNC key is pressed.)
1–60: When the FUNC key is pressed, the parameter setting screen for the
number which has been set is displayed.
OFF, 1–60
OFF
301
Display screen contrast
You can change the degree of contrast. The higher the number, the stronger
the contrast.
1–15 10
302
Counter display during automatic sewing mode
The contents appearing at (1) in the display during automatic sewing mode
can be set to either the lower thread counter display or the production counter
display.
1: Lower thread
counter
2: Production
counter
1
700
Correction of cutter Y position
The cutter position relative to the sewing pattern can be corrected in the Y
direction.
Settings can be made in units of 0.025 mm.
-0.800–0.800 0
4926M