7. ADJUSTMENT
HE-800B
111
7-21. Standard settings for treadle depression stroke
The following procedure sets the operating positions for the treadle depression strokes to the standard values.
1
Enter the signal settings.
While pressing the and keys, turn on the power switch.
2
Store the maximum forward depression amount.
With the treadle depressed all the way forward, wait until the
voltage display value stabilizes and then press the ENTER
key.
3
Store the neutral position.
With your foot released from the treadle, wait until the voltage
display value stabilizes and then press the ENTER key.
4
Store the maximum backward depression amount.
With the treadle depressed all the way backward, wait until
the voltage display value stabilizes and then press the
ENTER key.
5
End the settings.
“SUCCESSFUL COMPLETION” will be displayed on the
screen.
NOTE:
If the operation of the treadle is incorrect, a buzzer will
sound.
Repeat the operation from step 2.
6
Turn off the power switch.
0739D
0824D
0825D
0826D
0827D
0828D
Summary of Contents for HE-800B
