9. ELECTRIC MECHANISM
HE-800B
133
Error status #5 An error code is displayed during home position detection.
Probable causes
Check/ repair/ adjust
Parts to be replaced
1. If error E130, E131, E132 or E133
is displayed, there is a poor
connection of the synchronizer.
Refer to inspection #2
-4.
2. If error E130, E131, E132 or E133
is displayed, there is a poor
connection of the upper shaft
motor.
Check the connection of the relay connector
between the upper shaft motor and the motor
PCB.
3. If error E130, E131, E132 or E133
is displayed, there is a blown fuse.
a.
Remove fuses F1 and F2 from the motor PCB
and check the continuity.
OK if there is continuity.
b. If fuses F1 and F2 are blown, check the
resistances between each of the pins of the
relay connector between the upper shaft
motor and the motor PCB, and between the
terminals of the fuses. OK if ∞Ω
.
c. If the fuses blow again after they are replaced,
replace the motor PCB.
GFUSE10A-250V
(10A-250V)
Motor PCB assembly 800B
4. If error E130, E131, E132 or E133
is displayed, there is a malfunction
of the motor PCB.
a. Check the synchronizer input while referring to
“
3-7. Input checking method”.
OK if the
signal turns on and off.
b.
If step a. (above) is OK, there is a malfunction
of the motor PCB.
Resolver stator 800 assembly
Motor PCB assembly 800B
Summary of Contents for HE-800B
