HE-800B
3. FUNCTION SETTINGS
18
<Input check list>
Item No.
Input status
Check item and checking method
1
***
Shows the input voltage.
2
ON/OFF
X (needle zigzag) axis motor home position sensor position.
Move the needle bar manually.
Turns ON when moved to the left.
3
***
X (needle zigzag) axis motor encoder counter value.
Move the needle bar manually.
Goes down when moved to the left.
* When the power is turned on, the position will be “0”.
4
ON/OFF
Y (feed) axis motor home position sensor position.
Move the feed arm (1) manually.
Turns on when moved to the inside.
5
***
Y (feed) axis motor encoder counter value.
Move the feed arm (1) manually.
Goes down when moved to the inside.
* When the power is turned on, the position will be “0”.
6
ON/OFF
Work clamp motor home position sensor position.
Move the trimmer driving arm (1) manually.
Turns on when moved in the direction of the arrow.
7
***
Work clamp motor encoder counter value.
Move the trimmer driving arm (1) manually.
Goes down when moved in the direction of the arrow.
* When the power is turned on, the position will be “0”.
8
0 to 255
Treadle analog value.
Depress the treadle.
When depressed forward, the value increases.
* Should normally display somewhere around 109 when at the neutral position.
0771D
0771D
1770B
1770B
Summary of Contents for HE-800B
