manualshive.com logo in svg

Brother HL-1260, Service Manual

The Brother HL-1260 Service Manual is essential for maximizing the performance of your printer. It provides detailed instructions on troubleshooting, maintenance, and repair procedures. Easily accessible for free download from 88.208.23.73:8080, this user manual ensures smooth operation and optimal utilization of your Brother HL-1260 printer.

Share
Download
background image

CHAPTER 7 TROUBLESHOOTING

7–15

■

 Stains and Stripes

If the printed page is stained with toner or has vertical stripes, clean the
printer interior. See “Cleaning” in Chapter 6.

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucky in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucky in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucky Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucky in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucky in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucky Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucky in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucky in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucky Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Stains

Stripes

Stains at Fixed Intervals

Fig. 7-11  Dark Stripes or Toner Stains

If the same print problem occurs after cleaning, take any of the following
actions:
  • Make sure that you use paper or OHP films that meet specifications and

have the correct printing surface.

  • Check that the toner cartridge is not damaged. If it is damaged, 

replace it with a new one.

 
If the stripes or stains are vertically repetitive on a page, take the following
action in accordance with the intervals of the stripes or stains.

Interval

Action

95 mm or 3.7”

Replace the toner cartridge.

53 mm or 2.1”

Print several pages. *

51 mm or 2.0”

Replace the toner cartridge.

38 mm or 1.5”

Replace the toner cartridge.

     * If the problem occurs repeatedly, the transfer roller needs to be
      replaced with a new one. Consult your dealer or sales personnel.

Summary of Contents for HL-1260




































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for HL-1260

Xerox 220 Quick Install Manual preview
220
Brand: Xerox Pages: 8
Samsung SCX-4720F Manual Del Usuario preview
SCX-4720F
Brand: Samsung Pages: 322
Samsung SCX-3405FW User Manual preview
SCX-3405FW
Brand: Samsung Pages: 340
Samsung SCX-6320F Manual Del Usuario preview
SCX-6320F
Brand: Samsung Pages: 349
Samsung SCX-6220 User Manual preview
SCX-6220
Brand: Samsung Pages: 330
Samsung Xpress M2070FW User Manual preview
Xpress M2070FW
Brand: Samsung Pages: 315
Samsung SL-M2870FW Quick Installation Manual preview
SL-M2870FW
Brand: Samsung Pages: 2
Samsung SL-M2625D Installation Manual preview
SL-M2625D
Brand: Samsung Pages: 2
Samsung SL-M2625D User Manual preview
SL-M2625D
Brand: Samsung Pages: 232
Samsung SF-5800P User Manual preview
SF-5800P
Brand: Samsung Pages: 42
Samsung SCX-6545N Series User Manual preview
SCX-6545N Series
Brand: Samsung Pages: 468
Samsung SF-565PR User Manual preview
SF-565PR
Brand: Samsung Pages: 196
Samsung SCX4521F - B/W Laser - All-in-One User Manual preview
SCX4521F - B/W Laser - All-in-One
Brand: Samsung Pages: 120
Dascom TALLY MIP480 User Manual preview
TALLY MIP480
Brand: Dascom Pages: 138
Dascom T2150 User Manual preview
T2150
Brand: Dascom Pages: 166
Oki ES2024 Software Installation Manual preview
ES2024
Brand: Oki Pages: 20
Tally XPRESS T9412i Network User'S Manual preview
XPRESS T9412i
Brand: Tally Pages: 76
Kyocera KM-1820 Quick Start Manual preview
KM-1820
Brand: Kyocera Pages: 2

Brands by name

Popular brands

Load more brands