background image

CHAPTER 6 TROUBLESHOOTING

6–1

CHAPTER 6
TROUBLE SHOOTING

TROUBLESHOOTING

If any problems occur, the printer automatically stops printing, diagnoses
the problem, and displays the corresponding message to alert you. Take
the appropriate action, referring to the following tables. If you cannot
clear the problem, consult the dealer where you purchased the printer.
Inform the dealer of the message number for quick troubleshooting.

Operator Call Messages

When any of the following messages appear, the printer stops operating.

Operator Call Message

Meaning

Action

CHECK XXXXXXX

Check the paper tray.
XXXXXXX is TRAY 1/ TRAY 2/
TRAY3.

Check that the paper is correctly inserted in
the tray when the CHECK TRAY 1 message
appears.
Load a stack of paper into the cassette.

12 COVER OPEN

FRONT

The Front cover of the printer is
open.

Close the Front cover.

12 COVER OPEN

TOP

The Top cover of the printer is
open.

Close the Top cover.

12 COVER OPEN

REAR

The Rear Access cover of the
printer is open.

Close the Rear Access cover.

12 COVER OPEN
LFU

The Lower Feeder Unit Cover is
open.

Close the Lower Feeder Unit Cover.

12 COVER OPEN
DPX

The Duplex Unit Cover is open.

Close the Duplex Unit Cover.

13 JAM XXXXXX

Paper is jammed in the printer.
XXXXXX is DRUM/ TRAYS/
INSIDE/ REAR.

Remove the jammed paper from the
indicated area.
See the ‘

Paper Jams’ section

 in this chapter.

14 NO CARTRIDGE

XXXX COLOR

A toner cartridge is not installed in
the printer. XXXX indicates
colors.

Install the toner cartridge.

XX NO CASSETTE

The Media Cassette is not
installed. XX is T1/ T2/ T3.

Install the Media Cassette.

16 TONER EMPTY

XXXX COLOR

The printer has almost run out of
toner: you may print another 50
pages. (The 

Alarm 

LED lights at

the same time.) XXXX indicates
colors.

Remove the toner cartridge, rock it several
times at 45°, and install it again or replace
the toner cartridge with a new one.

Summary of Contents for HL-3400CN Series

























































































































































































































































































Reviews: