manualshive.com logo in svg

Brother HL-5130, Service Manual

The Brother HL-5130 is a high-quality laser printer ideal for small businesses and home offices. Ensure optimal performance and maintenance with the user-friendly "Brother HL-5130 Parts Reference List" manual, available for free download from our website. Simplify troubleshooting and keep your printer running smoothly with this valuable resource.

Share
Download
background image

HL-5130/5140/5150D/5170DN SERVICE MANUAL 

 

1-1

CHAPTER  1     GENERAL 

1.     FEATURES 

This printer has the following features; 

High Resolution and Fast Print Speed 

True 600 x 600 dots/ true 300 x 300 dots per inch (dpi) and HQ1200 for graphics with 
microfine toner and up to 17 (HL-5130)/ 20 (HL-5140/5150D/5170DN) pages per minute 
(ppm) print speed for A4 and 18 (HL-5130)/ 21 (HL-5140/5150D/5170DN) pages per minute 
(ppm) print speed for Letter- size paper. 

Versatile Paper Handling 

The printer loads paper automatically from the paper tray.  The paper tray can hold A4, letter, 
B5 (ISO), A5, B6 (ISO), A6, Executive and Legal size of paper.  The manual feed tray (HL-
5130/5140) allows manual paper loading sheet by sheet so you can use a variety of types and 
sizes of paper.  The multi-purpose tray (HL-5150D/5170DN) also allows you to use a variety 
of types and sizes of paper. 

Front Operation 

Basic operation of the printer can be controlled from the control panel. 

Enhanced Printing Performance and User-Friendly Operation for Windows

 

The dedicated printer driver for Microsoft

 Windows

 95/98/Me, Windows

 NT 4.0 and 

Windows

 2000/XP are available on the CD-ROM supplied with your printer.  You can easily 

install them into your Windows

 system using our installer program.  The driver supports our 

unique compression mode to enhance printing speed in Windows

 applications and allows 

you to choose various printer settings including toner save mode, custom paper size, sleep 
mode, gray scale adjustment, resolution, water mark and many layout functions.  You can 
easily setup these print options through the Printer Setup Menu. 

Printer Status Monitor with Bi-directional Parallel Interface  

The printer driver can monitor the status of your printer using bi-directional parallel 
communications.  IEEE-1284 bi-directional parallel printer cable is recommended. 

The printer status monitor program can show the current status of your printer.  When printing, 
the animated dialog box appears on your computer screen to show the current printing 
process.  If an error occurs, a dialog box will appear to let you know what to correct. If you 
have turned on the interactive Help (Windows only) you can get visual guidance on your PC 
screen on the actions in the event of certain printer errors. The default setting is OFF. 

Quick Print Setup 

The Quick Print Setup is a convenient utility to allow you to make changes to frequently used 
driver settings easily without having to open the printer properties selection box every time.  It 
is launched automatically when this printer driver is selected.  You can change the settings by 
clicking on the icon with the right mouse button. The default setting is OFF. 

Enhanced Memory Management 

The printer provides its own data compression technology in its printer hardware and the 
supplied printer driver software, which can automatically compress graphic data and font data 
efficiently into the printer’s memory.  You can avoid memory errors and print most full page 
600 dpi graphic and text data, including large fonts, with the standard printer memory. 

Summary of Contents for HL-5130





















































































































































































































































































Reviews:

No comments

Related manuals for HL-5130

Felix printers Pro Series Maintenance Manual preview
Pro Series
Brand: Felix printers Pages: 9
Felix printers Pro Series Calibration Manual preview
Pro Series
Brand: Felix printers Pages: 15
Felix printers Pro Series Firmware Update preview
Pro Series
Brand: Felix printers Pages: 15
Xerox 4520 User Manual preview
4520
Brand: Xerox Pages: 310
TallyGenicom T6212 Operator'S Manual preview
T6212
Brand: TallyGenicom Pages: 92
Xerox PHASER 6140 Quick Manual preview
PHASER 6140
Brand: Xerox Pages: 4
Canon imageRUNNER ADVANCE DX 6870i Service Manual preview
imageRUNNER ADVANCE DX 6870i
Brand: Canon Pages: 115
Canon imagerunner advance C5550i User Manual preview
imagerunner advance C5550i
Brand: Canon Pages: 1556
Xerox Nuvera 120 EA Customer Information preview
Nuvera 120 EA
Brand: Xerox Pages: 5
Axis 570 MIO Quick Installation Manual preview
570 MIO
Brand: Axis Pages: 10
Wang System 2200 2231w-3 User Manual preview
System 2200 2231w-3
Brand: Wang Pages: 52
Rockwell Automation Allen-Bradley ClearMark Quick Start Manual preview
Allen-Bradley ClearMark
Brand: Rockwell Automation Pages: 16
E-Pos TEP-220M User Manual preview
TEP-220M
Brand: E-Pos Pages: 21
NEC 4650NX - SuperScript Color Laser Printer Network Manual preview
4650NX - SuperScript Color Laser Printer
Brand: NEC Pages: 74
G&G GG IMAGE P4100 Series User Manual preview
GG IMAGE P4100 Series
Brand: G&G Pages: 102
Xerox VersaLink B625 User Manual preview
VersaLink B625
Brand: Xerox Pages: 342
Whip Mix VeriWash User Manual preview
VeriWash
Brand: Whip Mix Pages: 12
Epson All in One Printer User Manual preview
All in One Printer
Brand: Epson Pages: 210

Brands by name

Popular brands

Load more brands