CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-14
4. PRINTING METHODS
The printer provides two types of printing method; printing from the paper tray and printing
from the multi-purpose tray.
4.1
Printing from the Paper Tray
You can load plain paper, recycled paper or transparencies into the paper tray. If paper is
loaded into the paper tray, the printer automatically feeds paper sheet by sheet and ejects the
printed page into the output tray.
For the details on paper tray loading, refer to
subsection 3.1.2 ‘Load paper into the paper tray’
in this chapter
and
subsection 3.5 ‘Paper’ in CHAPTER 1
.
4.2
Printing from manual feed tray (HL-5130/5140 only)
(1) Select the Paper Size, Media Type and paper Source etc. in the printer driver.
(2) Send the print data to the printer.
NOTE: A NO PAPER message is shown in the Status Monitor and indicated by the control
panel LEDs until you put a sheet of paper in the manual feed tray,
Fig.2-11
(3) Open the manual feed tray. Slide the paper guides to fit the paper size.
Fig.2-12
