HL-6050/6050D/6050DN SERVICE MANUAL
4-59
(18) Remove the two bind B M3x10 Taptite screws from the MP chute.
(19) Remove the two MP pressure spring 25.
(20) Release the hook, and remove the gear 67 and conductor bearing 5.
(21) Lift the MP chute as shown in the figure.
Fig. 4-110
(22) Release the hook, and remove the MP-PE sensor actuator 1.
Fig. 4-111
Taptite, bind B M3x10
Taptite, bind B M3x10
MP chute
MP pressure spring 25
MP pressure spring 25
Gear 67
Conductor bearing 5
1
1
2
MP chute
MP-PE sensor actuator 1