HL-6050/6050D/6050DN SERVICE MANUAL
1-15
3.7
Print Speeds with Various Settings
Print speed of the HL-6050/6050D/6050DN printers is up to 24/25 ppm when loading A4 or
Letter size paper from the paper tray in the plain paper mode.
Actual print speed varies depending on the media type or paper size as shown in the tables
below;
<A4 / Letter size>
Media type setting
All models
Transparency
Up to 24/25 ppm
Thin Paper
Up to 24/25 ppm
Plain paper,
Env.Thin
Up to 24/25 ppm (Plain)
Up to 10 ppm (Env.)
Thick Paper,
Envelopes
Up to 24/25 ppm (Thick)
Thicker Paper
Up to 20 ppm *
Bond Paper
Up to 24 ppm*
Env./Env.Thin
Up to 6 ppm*
<Smaller size than A4 or Letter>
Media type setting
All models
Thin Paper
Up to 24/25 ppm
Plain paper
Up to 24/25 ppm
Thick Paper
12 ppm after 50 sec. have
passed.
Thicker Paper
Up to 20 ppm
12 ppm after 50 sec. have
passed.
Bond Paper
Up to 12 ppm *
Env./Env.Thin
Up to 6 ppm*
*The print speed may vary according to conditions, such as paper size and paper tray.
NOTE:
•
When a smaller size paper than A4 or Letter is printed, the temperature on both edges of
the fixing unit is much higher than the temperature on the center of the unit where the
paper is fed depending on the setting or model. Therefore, the print speed is slowed in
order to decrease the temperature on the edges after the specified time, it is maximum
print speed when you first start printing.
•
Max. speed is 24/25 ppm or more. It varies depending on the paper size.