CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-4
3. INSTALL THE PRINTER
You need to implement hardware setup and driver installation to use the printer.
Firstly, identify the Operating System on your computer. (Windows
®
95/98/Me, Windows NT
®
4.0, Windows
®
2000/XP and Macintosh)Then, purchase the appropriate interface cable
(Parallel, USB or Network) for your computer. Most existing parallel cables support bi-
directional communication, but some might have an incompatible pin assignment or may not
be IEEE 1284-compliant.
The installation programs for the hardware setup and driver installation are contained on the
supplied CD-ROM.
3.1
For All Users
For Windows
users
Turn on the PC power. Insert the supplied CD-ROM into the CD-ROM drive. The opening
screen will appear automatically.
NOTE:
1) If the opening screen does not appear; click
Start
and select
Run
. Then, enter the CD-
drive letter and type \START.EXE (for example: D:\START.EXE).
2) Do not connect the interface cable. Connecting the interface cable is done when installing
the driver.
(1) Follow the on-screen instructions.
(2) Click
Initial Setup
on the menu screen.
(3) You can view the Initial Setup instructions.
For Macintosh users
NOTE:
Do not connect the interface cable. Connecting the interface cable is done when installing the
driver.
(1) Turn on the Macintosh. Insert the CD-ROM into the CD-ROM drive.
(2) Double-click the
Start Here OS X
icon. Follow the on-screen instructions.
(3) Click
Initial Setup
on the menu screen.
(4) You can view the Initial Setup instructions.
