HL-6050/6050D/6050DN SERVICE MANUAL
2-35
5.2 Functions
5.2.1 LED
functions
Fig. 2-15
No light:
If both of the two LEDs are off, then the print server is not connected to the network.
Link/Speed LED is orange: Fast Ethernet
Link/Speed LED is green: 10 Base T Ethernet
This Link/Speed LED will be orange if the print server is connected to a 100BaseTX Fast
Ethernet network.
This Link/Speed LED will be green if the print server is connected to a 10 Base T Ethernet.
Active LED is yellow:
The Active LED will blink if the print server is receiving or transmitting data.
5.2.2 Factory default setting
If you wish to reset the print server back to its default factory settings (resetting all information
such as the password and IP address information), hold down the Network Test button on the
network board (NC-6100h) for more than 5 seconds.
Link/Speed LED
Active LED