manualshive.com logo in svg

Brother HL-720, Service Manual

The Brother HL-720 is a reliable and high-performance printer designed to meet your everyday printing needs. Unlock the full potential of your device by accessing the comprehensive Service Manual, available for free download at 88.208.23.73:8080. Get instant access to this valuable resource and ensure smooth operation of your printer.

Share
Download
background image

CHAPTER 6 TROUBLESHOOTING

CHAPTER 6 –13

Question Recommendation
Toner scatters and stains the
printed page.

Fig. 6-10 Scattering Toner

If toner scatters over the whole printing surface, adjust
the print density dial inside the printer counter
clockwise. See 

“ADJUSTING THE PRINT

DENSITY”

 in Chapter 5.

Clean the printer interior. See “Cleaning the Printer
Interior and Drum Unit” in Chapter 5.

Make sure that you use paper that meets specifications.

If you still have the same problem and the Drum lamp
is on, replace the drum unit with a new one.

The whole page is printed in
black.

Fig. 6-11 Black Page

Wipe the electric terminals referring to

 “Cleaning the

Printer Interior and Drum Unit” 

in Chapter 5. Never

use heat-sensitive paper as it will cause this problem.

If the same problem occurs and the Drum lamp is still
on after cleaning, replace the drum unit with a new
one.

Nothing is printed on the page.

Fig. 6-12 White Page

• 

Make sure that the toner cartridge is not empty.

• 

Wipe the electric terminals referring to 

“Cleaning

the Printer Interior and Drum Unit”

 in Chapter 5.

• 

Make sure that a torn piece of paper does not
remain on the scanner window.

Printed pages are marked at
regular intervals.

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. AA 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,heAA 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Lucy in the 

sky with Diamonde. Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be 

free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you goA 

to be free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with AAAAA 

Diamonde. One thing I can tell you is you go to be free. Come together right now, over me.  Here come  A 

Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  HereA 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me. A 

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go 

to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you 

go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is 

you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell A 

you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can 

tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I 

can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One A 

thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he A 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go to be free. Come AAA 

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. AA 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,heAA 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Lucy in the 

sky with Diamonde. Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be 

free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you goA 

to be free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with AAAAA 

Diamonde. One thing I can tell you is you go to be free. Come together right now, over me.  Here come  A 

Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  HereA 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me. A 

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go 

to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you 

go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is 

you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell A 

you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can 

tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I 

can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One A 

thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he A 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go to be free. Come AAA 

Fig. 6-13 Example of Regular

Marking

The problem may disappear by itself. Try printing
multiple pages to clear this problem especially if the
printer has not been used for a long time.

If the surface of the drum has been scratched, replace
the drum unit with a new one.

If the problem does not disappear, it may be that the
drum has been marked or damaged due to excessive
exposure to light. In this case, replace the drum unit
with a new one.

Summary of Contents for HL-720
























































































































































































































Reviews:

No comments

Related manuals for HL-720

QMS 2060 Supplementary Manual preview
2060
Brand: QMS Pages: 160
QMS 2060 Getting Started preview
2060
Brand: QMS Pages: 110
QMS 2060 Operation preview
2060
Brand: QMS Pages: 158
CAB A3 Operator'S Manual preview
A3
Brand: CAB Pages: 144
WANHAO Duplicator i3 Troubleshooting Manual preview
Duplicator i3
Brand: WANHAO Pages: 5
Wang 2241 Reference Manual preview
2241
Brand: Wang Pages: 24
Xerox 7760DN - Phaser Color Laser Printer User Manual preview
7760DN - Phaser Color Laser Printer
Brand: Xerox Pages: 158
Samsung CLP-775ND Service Manual preview
CLP-775ND
Brand: Samsung Pages: 134
Konica Minolta bizhub 160 Parts Manual Manual preview
bizhub 160
Brand: Konica Minolta Pages: 35
GCC Technologies JV-240UV User Manual preview
JV-240UV
Brand: GCC Technologies Pages: 97
Ricoh Aficio 2238C Operating Instructions Manual preview
Aficio 2238C
Brand: Ricoh Pages: 126
Lexmark C770n Specification Sheet preview
C770n
Brand: Lexmark Pages: 2
InkTec Jetrix LXi Series Manual preview
Jetrix LXi Series
Brand: InkTec Pages: 3
Oki MC770x User Manual preview
MC770x
Brand: Oki Pages: 78
Matan Barak Technical Note preview
Barak
Brand: Matan Pages: 8
MINOLTA-QMS PagePro 4100 User Manual preview
PagePro 4100
Brand: MINOLTA-QMS Pages: 67
Panasonic DP-3530 Service Manual preview
DP-3530
Brand: Panasonic Pages: 858
Sharp AR-NC5JG Service Manual preview
AR-NC5JG
Brand: Sharp Pages: 12

Brands by name

Popular brands

Load more brands